Search for: All records

Abstract Resolving fine details of astronomical objects provides critical insights into their underlying physical processes. This drives in part the desire to construct ever-larger telescopes and interferometer arrays and to observe at shorter wavelengths to lower the diffraction limit of angular resolution. Alternatively, one can aim to overcome the diffraction limit by extracting more information from a single telescope’s aperture. A promising way to do this is spatial-mode-based imaging, which projects a focal-plane field onto a set of spatial modes before detection, retaining focal-plane phase information that is crucial at small angular scales but typically lost in intensity imaging. However, the practical implementation of mode-based imaging in astronomy from the ground has been challenged by atmospheric turbulence. Here, we present the first on-sky demonstration of a subdiffraction-limited mode-based measurement, using a photonic-lantern-fed spectrometer installed on the Subaru Coronagraphic Extreme Adaptive Optics instrument at the Subaru Telescope. We introduce a novel calibration strategy that mitigates time-varying wave-front error and misalignment effects, leveraging simultaneously recorded focal-plane images and using a spectral-differential technique that self-calibrates the data. Observing the classical Be starβCMi, we detect spectral-differential spatial signals and reconstruct images of its Hα-emitting disk. We achieve an unprecedented Hαphotocenter precision of ∼50μas in about 10 minutes of observation with a single telescope, measuring the disk’s nearside–farside asymmetry for the first time. This work demonstrates the high precision, efficiency, and practicality of photonic mode-based imaging techniques in recovering subdiffraction-limited information, opening new avenues for high-angular-resolution spectroscopic studies in astronomy. 

Abstract Direct imaging observations are biased toward wide-separation, massive companions that have degenerate formation histories. Although the majority of exoplanets are expected to form via core accretion, most directly imaged exoplanets have not been convincingly demonstrated to follow this formation pathway. We obtained new interferometric observations of the directly imaged giant planet AF Lep b with the VLTI/GRAVITY instrument. We present three epochs of ∼50μas relative astrometry and theK-band spectrum of the planet for the first time at a resolution ofR= 500. Using only these measurements, spanning less than 2 months, and the Hipparcos-Gaia Catalogue of Accelerations, we are able to significantly constrain the planet’s orbit; this bodes well for interferometric observations of planets discovered by Gaia DR4. Including all available measurements of the planet, we infer an effectively circular orbit (e< 0.02, 0.07, and 0.13 at 1σ, 2σ, and 3σ, respectively) in spin–orbit alignment with the host and measure a dynamical mass ofM_p= 3.75M_Jup± 0.5M_Jup. Models of the spectrum of the planet show that it is metal-rich ([M/H] = 0.75 ± 0.25), with a C/O abundance encompassing the solar value. This ensemble of results shows that the planet is consistent with core accretion formation. 

TheβPictoris system is the closest known stellar system with directly detected gas giant planets, an edge-on circumstellar disc, and evidence of falling sublimating bodies and transiting exocomets. The inner planet,βPictoris c, has also been indirectly detected with radial velocity (RV) measurements. The star is a knownδScuti pulsator, and the long-term stability of these pulsations opens up the possibility of indirectly detecting the gas giant planets through time delays of the pulsations due to a varying light travel time. We search for phase shifts in theδScuti pulsations consistent with the known planetsβPictoris b and c and carry out an analysis of the stellar pulsations ofβPictoris over a multi-year timescale. We used photometric data collected by the BRITE-Constellation, bRing, ASTEP, and TESS to derive a list of the strongest and most significantδScuti pulsations. We carried out an analysis with the open-source python package maelstrom to study the stability of the pulsation modes ofβPictoris in order to determine the long-term trends in the observed pulsations. We did not detect the expected signal forβPictoris b orβPictoris c. The expected time delay is 6 s forβPictoris c and 24 s forβPictoris b. With simulations, we determined that the photometric noise in all the combined data sets cannot reach the sensitivity needed to detect the expected timing drifts. An analysis of the pulsational modes ofβPictoris using maelstrom showed that the modes themselves drift on the timescale of a year, fundamentally limiting our ability to detect exoplanets aroundβPictoris via pulsation timing. 

Abstract We resolve the multiple images of the binary-lens microlensing event ASASSN-22av using the GRAVITY instrument of the Very Large Telescope Interferometer (VLTI). The light curves show weak binary-lens perturbations, complicating the analysis, but the joint modeling with the VLTI data breaks several degeneracies, arriving at a strongly favored solution. Thanks to precise measurements of the angular Einstein radiusθ_E= 0.724 ± 0.002 mas and microlens parallax, we determine that the lens system consists of two M dwarfs with masses ofM₁= 0.258 ± 0.008M_⊙andM₂= 0.130 ± 0.007M_⊙, a projected separation ofr_⊥= 6.83 ± 0.31 au, and a distance ofD_L= 2.29 ± 0.08 kpc. The successful VLTI observations of ASASSN-22av open up a new path for studying intermediate-separation (i.e., a few astronomical units) stellar-mass binaries, including those containing dark compact objects such as neutron stars and stellar-mass black holes. 

Abstract Photonic technologies offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile that combines the light-gathering power of four 8 m telescopes through a complex photonic interferometer. Fully integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization when operating at the diffraction-limit, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering significant cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns to convert from multimode inputs to single mode outputs, complex aperiodic fiber Bragg gratings to filter OH emission from the atmosphere, complex beam combiners to enable long baseline interferometry with for example, ESO Gravity, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 key areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional integrated instruments will be realized leading to novel observing capabilities for both ground and space based platforms, enabling new scientific studies and discoveries.